Sign in | Register | My account |

4WD light and ABS indicator on after removing of wheel hub?

Fill
5

Asked by Fill Mar 07, 2011 at 10:43 AM about the 2008 Hyundai Santa Fe GLS

Question type: Maintenance & Repair

I remove the front wheel hub to inspect a noise in the wheel (bearing makes anoise like is dry) after put back in plance the hub, the ligh of 4WD and ABS came on and do not desapear fron the panel. has someo experienced the same problem?

2 Answers

buccaneerz89
815

First try to reset your computer by disconnecting the negative battery terminal for a minute. If it still is on you might of messed up the wheel speed sensor on that wheel.

1 out of 1 people think this is helpful.
Fill
5

Thanks Buccaneer, I will try your advise.

Your Answer

Related Questions

  • What is the cause of having abs & tcs lights come on after driving 30 miles on highway 5 answers

    After driving about 30 miles on highway my haundai Santa Fe 2005 showing ABS & TCS Sign & also when I push brake pedal at high speed it make grinding noise.so what could be the problem.

    2005 Hyundai Santa Fe GLS 2.7L AWD

    -

    General

  • Tire problem - what type of tire should I replace with? 106 answers

    I was very disappointed to find that one of the tires on my 2010 Elantra Touring had a sidewall bulge. I did some research and found that the OEM tires, Kumhos, are known for developing these bulges...

    2010 Hyundai Elantra Touring SE

    -

    Maintenance & Repair

  • Can I use any sealant for the leakage in proportional valve in my 2002 Hyundai Elantra? 6 answers

    I am having a 2002 Hyundai Elantra. There is a brake fluid leakage (it is a dip) exaclty in the rear outlet under the proportional valve. I am refilling my brake fluid every three weeks. So, is ther...

    2002 Hyundai Elantra GLS

    -

    Maintenance & Repair

  • My ABS indicator lights up from time to time 2 answers

    I have just replaced my 4 wheel bearings (Hub assembly with ABS) on my 99 venture but after a month my ABS indicator keeps on lighting up. Although my brakes are still working I believe the anti-lock...

    1999 Chevrolet Venture

    -

    Maintenance & Repair

  • abs light on 2 answers

    2004 gx470. I just replaced the front wheel bearing with a Duralast bearing that has ABS components. This was verified by the technician that pressed the hub into the bearing. ABS light came on wit...

    2004 Lexus LX 470 Base

    -

    Maintenance & Repair

Search Hyundai Santa Fe Questions

Hyundai Santa Fe Experts

#1 LouB
LouB
Reputation 760
#2 James Warner
James Warner
Reputation 230
#3 dandyoun
dandyoun
Reputation 220
View All