Is there a gasket kit you have to replace when replacing a heater core? Beside a coolant gasket kit...

Asked by bkck50____ Nov 23, 2012 at 05:25 PM about the 1993 Ford Mustang LX Convertible

Question type: Maintenance & Repair

I had a heater core replaced by a mechanic shop that charges for things they didn't do. Long story short
my heater kicked ass I took it to get a new heater put in it. Well not only does the car blow cold
air?,but they charged me for 2 gasket kits. I know 1 is for the coolant,had air done also,I have no idea
why I was charged for 2 gaskets kits.Does anyone know if there are 2 to replace when doing a heater
core and the air?

- Report

Daniel answered 5 months ago

reseal the heater box when replacing core

Mark helpful

Your Answer

I need a mechanic who won't cheat me of money, and who will fix my car properly. I need one close to where I'm stayin, off NW Hwy, and Stemmons Trail, at Studio 6 will you give me a reference, 5 answers

My car which is in pretty damn good shape as it's a 95, has external coolant leak, I've had a cpl of mech. want to be's tell me it needs gaskets, at timing chain cover, water sleeve, ?? I think I was...

1995 Ford Mustang STD Coupe

-

Maintenance & Repair
Does anyone know how to work the air controls on a 1966 mustang? I'm sure this is a standard Ford part.I'm not even sure what they're called, fan / air conditioning / force blown air, etc.. My 1966 mustang came with A/C standard. In the dash there are chrome controls for the air. One lever is horizontal and has about 5 notches that it clicks into place. It slides from left to right and back. Have no idea what that does. Directly underneath are three vertical levers.. The first one is labeled HEAT. I can't figure out if it being in the up position is turning the heat on or off. Next to that is TEMP. Next to that is a blank one. All three slide up and down. Does anyone have any idea how these work? I'm trying to get the heat to work and am freezing my a** off, as it seems to be blowing A/C. 2 answers

Air controls for 1966 Ford Mustang with A/C.

1966 Ford Mustang Base

-

Maintenance & Repair
headlights 8 answers

The headlights on my 02 mustang gt are yellowing and oxidized, Is there any way other than replacing them, to make them clear again?

2002 Ford Mustang GT

-

Maintenance & Repair
My clutch snapped the mechanic replaced it but it still doesn't move 6 answers

I was driving down the road In 5th gear, I went to shift down to 4th but i accidentally threw it in 2nd and when I let go of the pedal and something snapped and i don't know what it is

2004 Ford Mustang Base

-

Maintenance & Repair
Supercharger 11 answers

So i've got about $2400 to spend on a supercharger, i want to go with a centrifugal supercharger... Any suggestions??? (heres some of the stuff ive done so far. Motorvation Performance Chip, 70mm MAF...

1991 Ford Mustang GT Hatchback

-

Car Customization

#1		Tom Demyan Reputation 630
#2		tenspeed Reputation 420
#3		carGrrl Reputation 400

Is there a gasket kit you have to replace when replacing a heater core? Beside a coolant gasket kit...

1 Answer

Your Answer

Related Questions

I need a mechanic who won't cheat me of money, and who will fix my car properly. I need one close to where I'm stayin, off NW Hwy, and Stemmons Trail, at Studio 6 will you give me a reference, 5 answers

headlights 8 answers

My clutch snapped the mechanic replaced it but it still doesn't move 6 answers

Supercharger 11 answers

Shortcuts

Search Ford Mustang Questions

Ford Mustang Experts

Related Models For Sale

Used Cars For Sale