the block heater cord located??
1 Answer
casper271 answered 5 years ago
if you look on the block, you will see a cord coming out of one of the frost plugs. that will tell you if you have one. if you do look around the drivers front (top) you will see a cord wound up. If you cant locate it ask the dealer and they will show you, some people run it through the grille, you might want to look there was well. not all Escape came with one. hope this helps, best of luck.
Your Answer
Related Questions
-
Where are the fuses for the radio and cd player on the 2006 ford escape xlt located 2 answers
Ford Escape
-
General
-
2012 Escape tire sensor question 2 answers
If a tire loses air pressure does the sensor alert you to which specific tire is low or do you have to check all the tires? And if it does alert to the specific tire, when you rotate the tires do you...
2012 Ford Escape XLT
-
General
-
Adding fuel additive to a 2011 Ford Escape 6 answers
How do you add fuel additive to my Escape ? it has a no cap fuel system.
2011 Ford Escape
-
General
-
Wher would a "bleeder screw be located? 3 answers
Having been suggested I have air in the coolant system. I may fill the reservoir and bleed the air out if your engine has a bleeder screw. If I have a bleeder screw, where would it be located? Thank...
2008 Ford Escape XLT V6 4WD
-
Maintenance & Repair
-
Where is the Relay switch for 2005 Ford Escape is located. 1 answer
Only my back hatch opens when using key to open door locks. Could you please tell me where the relay switch for this problem is located.
2005 Ford Escape XLT
-
Maintenance & Repair
Shortcuts
Search Ford Escape Questions
Ford Escape Experts
| #1 |
|
kbro
Reputation
350
|
| #2 |
|
DavidH25
Reputation
240
|
| #3 |
|
Tom Demyan
Reputation
230
|