What do codes P0300, P0301, P0303, P0305, P1316, P0420, P0430 mean?

Asked by skylerb Apr 17, 2012 at 07:43 PM about the 2003 Jaguar X-Type 3.0

Question type: Maintenance & Repair

- Report

hightechpro answered about a year ago

P0300 to p0306 means misfire,p1316 about injectors circuit IDM detected...and p0420 catalyst system bank 1 p0430 catalyst system bank 2...

Mark helpful

175

- Report

Raihan answered about a year ago

Its a major vacuum leak leads to misfires and then leads to bad sparks ,bad cat code is only triggered for the misfire. You need a complete tune up , changing sparks,replacing breather hose and valve that connects to the valve cover ,brake booster linkage which connects to air intake manifold, IMT o-rings (2 of them) Good news These parts are generally cheap if buy from online or jag dealer.And parts can be replaced easily , well I did it myself the ngine is better than i got it. Bad News Cat might been damaged( if car is not fixed soon), Also Labor will cost more in workshop than DIY I had the same problem at 90k,Fixed everything myself, now its like new again , Also changed to custom cold air intake now i get 32 mpg on the highway. check my profile for details

2 out of 2 people think this is helpful.

You think this is helpful.

Mark helpful

- Report

Brad answered 2 months ago

What is a custom cold air intake?

Mark helpful

Your Answer

what needs to be fixed when the check engine code 300 for a 2003 x type 4 answers

the light has been coming off and on for a couple months, now its stuck on, the car has a hard time going up hills unless I manually shift the gears... and thoughts?

2003 Jaguar X-Type 2.5

-

Maintenance & Repair
Codes P0171 & P0174 (Too lean bank 1 & Too lean bank 2) 4 answers

I have checked all vacuum lines, sprayed carb cleaner around MAP sensor, Intake manifold gaskets, between throttle body and manifold and around all vacuum points. All are tight. I've cleaned the MAF s...

2002 Jaguar X-Type 2.5

-

Maintenance & Repair
Hello everybody, I have a 2005 x-type 3.0 thats setting DTC codes for all the coils, PO351-PO356, it starts and runs 4 a few seconds and shuts off. Any ideas on what would cause this? Thanks, LW 1 answer

It keeps setting DTC code Po-351 thru PO-356 coils. It starts sometimes and runs maybe 10 minutes and quits and other time it starts and quits in a few seconds. I have changed the CPS and no change. A...

2005 Jaguar X-Type 3.0L

-

Maintenance & Repair
abs and engine light won't go off 9 answers

my 2002 x-type 2.5 has engine light and abs lights on and can't seem to get them off.Had abs sensor replaced(code called for that) then codes called both front speed senors had them replaced. Now the ...

2002 Jaguar X-Type 2.5

-

Maintenance & Repair
what does code P0420 mean 3 answers

my check engine light came on and i had it scanned and the code was P0420.. what does that code mean?

2001 Volvo S40 STD

-

Maintenance & Repair

Looking for a Used X-Type in your area?

CarGurus has 875 nationwide X-Type listings starting at $3,800.

#1		Raihan Ahmed Reputation 110
#2		tenspeed Reputation 100
#2		judge_roy Reputation 100

What do codes P0300, P0301, P0303, P0305, P1316, P0420, P0430 mean?

3 Answers

Your Answer

Related Questions

what needs to be fixed when the check engine code 300 for a 2003 x type 4 answers

Codes P0171 & P0174 (Too lean bank 1 & Too lean bank 2) 4 answers

Hello everybody, I have a 2005 x-type 3.0 thats setting DTC codes for all the coils, PO351-PO356, it starts and runs 4 a few seconds and shuts off. Any ideas on what would cause this? Thanks, LW 1 answer

abs and engine light won't go off 9 answers

what does code P0420 mean 3 answers

Shortcuts

Search Jaguar X-Type Questions

Jaguar X-Type Experts

Related Models For Sale

Used Cars For Sale