I have 1997 Subaru legacy outback, we have replaced the battery and alternator and now the parking light are on constantly, they do not go out even when the key is removed, is there a reset button or something?

I have 1997 Subaru legacy outback, we have replaced the battery and alternator and now the parking light are on constantly, they do not go out even when the key is removed, is there a reset button or something? 2 Answers

i HAVE A 2004 SUBARU LEGACY OUTBACK THAT GETS A PO301 CODE WHEN THE ENGINE LIGHT STAYS ON AND THE CRUISE CONTROL LIGHT BLINKS. THE CRUISE CONTROL DOES NOT WORK WHEN THIS SITUATION IS NOT RESET. 2 Answers

DOES THE CRUISE CONTROL LIGHT TELL ME MORE ABOUT MY PO301 CODE PROBLEM?

I have a 2002 Subaru legacy and it just came back from the body shop and had a new tailgate, light and rear window replaced from a hit and run, Got it home and it will not start anymore. Installed a new battery and the odometer and the door open lights come on but it will not even click. hit the hazard lights and it makes a buzzing sound any help will be appreciated as I have cleaned the terminals and connections checked the connections at the alternator and the starter. 1 Answer

I have a 2002 Subaru legacy and it just came back from the body shop and had a new tailgate, light and rear window replaced from a hit and run, Got it home and it will not start anymore. Installed a ...

I have a 1996 Legacy Outback. The engine has been replaced and I would like to find out what year this engine is. The numbers on the engine are, 44811 and its a EJ25 DOHC 1 Answer

The valve cover are leaking and I would like to replace them...But I noticed that the valve covers are different that the year of the car...the photos show valve covers that are kinda round, these are...

I turned my 97 Subaru legacy 2.5gt off. When I tried to restart it everything was dead!!! It was like the battery wasn't hooked up. I took the keys out and walked in the house. I looked outside and the tail light were on and the front amber lights were on. I tried to start it and nothing. I cleaned the battery posts but it didn't help. I unhooked the positive cable and put the key in the ignition and turned it on in order to hook the positive cable up. It started just fine, however the running lights are still on and the dash lights are blinking! I turned the engine off and the running lights were still on and the dash lights were still blinking. I had to unhook the positive cable to stop this process. Can anybody out there point me in the right direction??? 1 Answer

I turned my 97 Subaru legacy 2.5gt off. When I tried to restart it everything was dead!!! It was like the battery wasn't hooked up. I took the keys out and walked in the house. I looked outside and th...