HOW MUCH TO REPLACE A KEY
2 Answers
Jason answered 8 months ago
if i remember right 120? ...if it has a coded key. be sure to give the key id# make if you have them! it will cost less for a new key.
Richard answered 8 months ago
25-50 depending on if they charge you to program it- if you have the original key, all you have to do to program it is put the original key in first, turn it 2 clicks forward until all the options come on but not far enough to start it- count to 5 and then quickly take that key out and put the new key in and put it 2 clicks forward and count to 5 with that one too(you must do it right away or you have to start over) - then turn it the rest of the way forward and it should start- if that doesn't work try again and count to 10 this time. I hope this helps.
Your Answer
Related Questions
-
Sliding door locks 3 answers
When I use the lock switches on the driver-side and passenger-side doors, they do not unlock nor lock the sliding doors. The key fob does not work on the sliding doors, either.
2006 Chevrolet Uplander
-
Maintenance & Repair
-
What is ABS Service mean? 6 answers
The dashboard is reading , ABS Service?
2005 Chevrolet Uplander
-
Maintenance & Repair
-
I locked keys in the van how can i get it open with out calling sombody to open it 2 answers
How can i unlock it it myself
2007 Chevrolet Uplander
-
General
-
key wont turn 1 answer
I put the key in the ignition but it wont turn
2006 Chevrolet Tahoe LS 4WD
-
Maintenance & Repair
-
un stuck key turn key and nothing like there is no power 1 answer
repaired radiator pushed truck forward a little turned key over and started for a minute turned key off turned key back on nothing happened tried to turn key off and remove and key would not come tr...
1997 Chevrolet Blazer 2 Dr LS 4WD SUV
-
Maintenance & Repair
Shortcuts
Search Chevrolet Uplander Questions
Chevrolet Uplander Experts
| #1 |
|
John Leone
Reputation
50
|
| #2 |
|
DavidH25
Reputation
40
|
| #2 |
|
lightGear
Reputation
40
|