- Home /
- Questions /
- Honda /
- CR-V /
- 99 crv auto trans while driving giving it gas car started to make grind noise and came to slow stop ...
99 crv auto trans while driving giving it gas car started to make grind noise and came to slow stop ,engine np
Question type: Maintenance & Repair
While driving home car started to make grind noise and slowly came to stop no mater if revving engine. Wont go into
any gear or park . Sounds like when shifting it tries to go in gear when in D car revs speedo goes up as if moving
but not going anywhere
7 Answers
DavidH25 answered 3 months ago
Ouch. There are guys on this forum that know Honda's. My only reply Sid, is tow it to a transmission shop ..unless you are a do it yourself, under your oak tree mechanic, one of the fellers will come along that knows Hondas. Sorry I am no help, but opened your question to assure you of that.there are guys that will know
DavidH25 answered 3 months ago
Sid is it a transverse engine? I am thinking broken axle, CV joint, driveshaft, especially when you tell us the speedometer shows as if you are moving
judge_roy answered 3 months ago
Not the engine, the drivetrain- and specifically the drive axle, not CV joints would make a hell of a racket and would not silently stop behaving, but the CV boots tend to go to hell and let the grease out, but do make some noise and actually crack to make your problem happen. Probably not as myserious as all that. Inspect the drivetrain, and report back-
judge_roy answered 3 months ago
You nailed it H25. I should just go back to bed and leave ALL the heavy lifting to you~
Sldoaktree answered 3 months ago
While pulling out of gas station prior to condition did hear a pop thought might be rock i run over . Drove fine next right turn is when all this started and do hear grinding noise but went away quik. Trans was just rebuilt 13 months ago. I replaced driverside half shaft a year ago . I bet passanger is the issue . At work now will check when i get home thanks for the help
Sldoaktree answered 3 months ago
Well the driverside half shaft was torn up. Replaced it good as new . Thanks for the help very much appreciated
judge_roy answered 3 months ago
No problem my friend, always willing to help a sidoaktree, my favorite!
Your Answer
Related Questions
-
srry bout that its a 1998 honda accord lx v6 2 answers
1998 Honda Accord LX V6
-
Maintenance & Repair
-
On my dodge durango it has a np 244d transfer case do you think I can change it out for a np242wj case
2003 Dodge Durango
-
Maintenance & Repair
-
have a 1989 k1500 z71 4x4 with the 4.3 im 17 and about to get my license i was wondering if anyone could tell me what kinda gas mileage i can expect it has a 3 inch lift and 33 inch tires thanks 3 answers
1989 Chevrolet C/K 1500
-
Maintenance & Repair
-
1 3 5 gears work 2 4 reverse dont whats wrong 5 answers
1999 Saturn S-Series 3 Dr SC2 Coupe
-
Maintenance & Repair
-
engine 32 answers
what is the engine code name on the skyline gt-r ?
1992 Nissan Skyline
-
General
|
Looking for a Used CR-V in your area?
CarGurus has 37,216 nationwide CR-V listings
starting at $3,250.
|
Shortcuts
Search Honda CR-V Questions
Honda CR-V Experts
| #1 |
|
Tom Demyan
Reputation
330
|
| #2 |
|
PEng
Reputation
250
|
| #3 |
|
saman2812
Reputation
220
|