I need to get a fusee for my gas pedal to work but I don't know where it's at in my fuse box it is a 22002 Toyota Camry

I need to get a fusee for my gas pedal to work but I don't know where it's at in my fuse box it is a 22002 Toyota Camry 1 Answer

my 2009 toyota camry le someimes have to shake the ouside fuse box to make it get a conection to my ignition switch do anyone know the problem 3 Answers

it looses current to the ignition switch

I accidentally reverse boosted my 2010 Toyota Camry Sport. The car will move in reverse and all electrical systems seem to be fine, but it will not accelerate or move forward. Any suggestions? Could it be a fuse? 2 Answers

I thought I knew what I was doing when I tried to boost my dead battery on my 2010 Toyota Camry Sport. The car started and I took the cable off. However it will now only drive in reverse. All electr...

my 1994 toyota camry (6 cyl) has a fuel consistancy problem from time to time. The car WILL start and WILL idle but will not feed the gas when the pedal is pressed. It is an intermitant problem. 2 Answers

My 1994 Toyota Camry (6 cyl) has a fuel consistency problem from time to time. The car WILL start and WILL idle but will not feed the gas when the pedal is pressed. It is an intermittent problem. N...

I just replaced the master, wheel cylinders, and 6' of line, but I am not able to get a firm pedal after bleeding. I think it's the booster, but I'm not sure It's a 1991 toyota camry 4cyl NON ABS 3 Answers

1991 Toyota Camry 4cyl NON ABS Just replaced the master, wheel cylinders, and 6' of line, but when bleeding I can't get the pedal to stay, it keeps dropping to the floor. I think it's the booster, bu...