The mounting bolts for my engine cradle broke off. The part of the subframe that it bolts to, no longer has the threaded hole for me to put a new bolt in. Is there a way to replace the threaded part?

The mounting bolts for my engine cradle broke off. The part of the subframe that it bolts to, no longer has the threaded hole for me to put a new bolt in. Is there a way to replace the threaded part? 1 Answer

My car has water in it from the summer in place of the anti freeze the weather is getting colder and I am wanting to know is there a easy way for me to drain it to add anti freeze wo tools 1 Answer

It still starts for me so far can I just add pure antifreeze

I have a 2001 pontiac grand am gt.The bolt that holds the tensioner pulley in the engine block keeps coming out and my belt slips off! Is it possible that it has the wrong size bolt or something else? 6 Answers

The bolt that holds the tensioner pulley into the engine block keeps coming out and my belt and pulley fall off! Is it possible that the bolt is the wrong size or maybe the threads inside the block ...

replaced my water pump still have a leak it looks to be right above the crank pully comming from and alum part to me looks to be part of the water pump housing is this the timing cover leak I heard of 1 Answer

Please I'm trying to fix and sell to friends who need a car and I don't want to sell them a beater or a patch job thank you

My fuse on the engine compartment fuse block for my HVAC blower motor has blown. It has melted so bad that the prongs for the fuse are stuck deep down in the block. 2 Answers

It has melted so bad that the prongs for the fuse are stuck deep down in the block. I can't even use needle nose pliers or fine point tweezers. is there a way to take apart the fuse block? Or am I goi...