i'm getting p0340 on my 97 eclipse spyder gs 2.4L. I changed the cam shaft position sensor why is it still coding. also have to give it gas a few times so it can stay on and idle right. any answers

i'm getting p0340 on my 97 eclipse spyder gs 2.4L. I changed the cam shaft position sensor why is it still coding. also have to give it gas a few times so it can stay on and idle right. any answers 2 Answers

to start the car i have to step on the gas pedal til i'm sure it will stay running on my 1997 mitsubishi eclipse spyder gs 2.4l 5 Answers

i changed the timing belt, water pump, cam shaft senor , crankshaft senor,spark plugs and wires. now in order for the car to stay on i have to have my foot on gas pedal for a second til its runs on ...

Is it necessary to have a timing cover for 2002 Eclipse Spyder gs? 1 Answer

Is it necessary to have a timing cover for 2002 Eclipse Spyder gs?

My 2002 Mitsubishi Eclipse Spyder GT (6 c) has the check engine light on. I took it to Meineke and they said it's the 401 code for the exhaust. They changed some small part but the light came back on again. Then they said it's the EGR valve so they change that as well to no effect. I took the car there a third time and they checked the exhaust system for leaks and made some more readjustments. The light came back on again. Now they say they have no idea what it might be. What should I do next? 2 Answers

My 2002 Mitsubishi Eclipse Spyder GT (6 c) has the check engine light on. I took it to Meineke and they said it's the 401 code for the exhaust. They changed some small part but the light came back o...

2003 eclipse spyder gs so from what im told my issue is my clutch pressure plate need replaced but is there a way to jerry rig it just to be able to drive it to a repair shop? 19 Answers

so my eclipse will turn over but wont start and my shifter gets stuck if i try and start it in a gear. got it looked at and was told its my clutch pressure plate but i cant even get it to start to g...