passenger turn signal works on front but not on back and flashes fast. all bulbs have been checked. what do i need to check next. lady with a classic

passenger turn signal works on front but not on back and flashes fast. all bulbs have been checked. what do i need to check next. lady with a classic 1 Answer

My break lights are not working when I push the peddle down and my left turn signal in the rear works when it wants to I checked all the fuses and changed the break light switch but no luck so far 3 Answers

Before I changed my break light switch I would here a click when I would barely press on the break and the break lights would work until I pushed them all the way down to stop now that I changed ...

front and back exterior turn signal not working, dash lights work 1 Answer

I had to replace the turn signal switch because the hazards weren't working. All lights on the dash now work as they should. I replaced the front side marker light, it was blown. Driver signals weren'...

I NEED A REAL GURU ON THIS ONE!!! 1993 GMC K1500 5.0L Have changed most of the fuel system but still having issues of not wanting to start. 5 Answers

The truck is a standard cab with an 8ft bed and 131" wheel base if that makes any difference. So here is the scenario: the truck was having issues of starting and then would start to stall and I wou...

04 gmc sierra 1500 5.3 died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was zero) anyways checked fire none checked injectors they wasnt working either(built fuel pressure then unplugged fuel relay then turned engine over and the pressure stayed the exact same) i assume it might be the crank sensor but i would think it would throw a code, anyways came back this morning and before doing anything for the hell of it i checked the gas cap and tightened it and it fired up perfect three different times and the last time i let it run and it died after bout 45 seconds (fuel pressure reads 55) and after it died its doing the same thing cranks but wont fire or start 1 Answer

died on me on the highway got it towed home starting going at it, hooked two different scanners to it and not throwing any codes (ecm is working bc the map was reading correctly but also the rpm was...