I'm getting a used front wheel bearing for my 2002 Ford Escape XLS AWD. Due to most of that same truck already having that part pulled off I was curious if the wheel bearing was the same on a 04 2 WD?

I'm getting a used front wheel bearing for my 2002 Ford Escape XLS AWD. Due to most of that same truck already having that part pulled off I was curious if the wheel bearing was the same on a 04 2 WD? 3 Answers

how to change front wheel bearing drivers side on a 2006 ford escape xlt with automatic 4 wheel drive 1 Answer

do I change the bearing or the hub assembly

My 2008 Ford Escape AWD floor matts keep getting soaked. I thought I had fixed it by making sure the sunroof was closed properly, but it has continued. I have tried to figure out where this is coming from and finally after drying them out again I laid under the the vehicle and both on the drivers side in the middle of the front floor area and the passanger side there is a small hole about the size of a dine right in the middle. That would account for the water coming in after rain storms and such, but why would these two holes be there? Was there a drain area there with plugs and they are missing? Can I have a piece of metal welded over them? Don't know why they would be there. Doesn't seem to be a rust issue as it is frim all around these small holes. 7 Answers

Water leak on floors from underneath. There is a small hole size of a dime on both drivers side and passanger side underneath floor matts right in the middle of each. Can I have this repaired with a...

Why is my front wheel bearing goin out so much 2 Answers

I have changed my front wheel bearing three times in a week and a half on my 2003 Ford escape 4wd 3.0 could anybody give me a heads up on what to do or what to look for

I bought a 2004 ford escape which needed front tires back tires were at about 75% fronts were left was at 60% right was bald I have a set of perfect 90% tires same size and tread pattern I want to put 2 Answers

on front seeing that an escape is primary front drive until one of the front wheels slips do you think the difference in tread depth will be harmful I'm thinking it would be better than having a baldy...