1999 crown victoria shift solenoid

0

Asked by chazz99 Mar 18, 2010 at 10:32 AM about the 1999 Ford Crown Victoria 4 Dr LX Sedan

Question type: Maintenance & Repair

where is this part located in -or- out of the transmission?

15

- Report

Axiom_458 answered 3 years ago

In. You need to drop the trans pan and drain the fluid to get to the solenoid pack (There are 2 solenoids in the 4R70W).

Mark helpful

Your Answer

Tranny 7 answers

Got a 95 crown vic with 52 k on it and sometimes when I put it in drive, it doesnt grab right away. It doesnt slip and runs great...in excellent shape. Is there a way to tighten up the tranny bands? A...

1995 Ford Crown Victoria 4 Dr LX Sedan

-

Maintenance & Repair
2003 Cvp wont start Crank nothing 1 answer

It was working fine a week ago then one day I went to go to class no start no noise but the fuel pump kicking in I have power to everything. But my turn signals they just stopped working as well I re...

2003 Ford Crown Victoria Police Interceptor

-

Maintenance & Repair
Why is my 1985 ford crown vic ltd starting up byitself? 3 answers

I replaced the starter solenoid now when I place the batt terminal on battery it starts up by it's self ..... No alarm or remote starts on vehicle

1985 Ford LTD Crown Victoria

-

Maintenance & Repair
MY 1999 FORD F150 WILL NOT COME OUT OF 4WD 8 answers

MY 1999 FORD F15O WILL NOT COME OUT OF 4WD IS THERE A FUSE THAT COULD HAVE GONE BAD?

1999 Ford F-150

-

Maintenance & Repair
My sister in law's 2002 v6 won't shift into any foreword gears, but reverse, park and neutral work fine. 1 answer

I have checked the shift solenoid fuse and there appears to be enough fluid.

2002 Ford Escape XLS 4WD

-

Maintenance & Repair