how do you change rear brake pads

0

Asked by gaknig3 Aug 07, 2007 at 01:33 AM about the 2001 Chevrolet Silverado 2500HD LS Crew Cab LB 4WD

Question type: Maintenance & Repair

how do you get the torx bolts out of the rear calipers so i can change the pads? What size is the torx wrench needed ( T-50)?

6,315

- Report

dvigano answered 5 years ago

Hi gaknig3, I believe to remove the brake caliper for your vehicle requires a T-70 Torx bit. Good luck!

Mark helpful

Your Answer

Vibration while braking. 6 answers

Changer out rotors and pads and still vibration continues while braking

2001 Chevrolet Silverado 2500HD LS Extended Cab 4WD

-

Maintenance & Repair
Get thud sound after applying brake 4 answers

After applying brake and coming to a stop, get a thud sound like something is loose. Same sound occurs when brake is released. Had new rear rotors and brake pads installed along with new shocks. So...

Chevrolet Silverado 2500HD

-

Maintenance & Repair
why does my 01 tahoe use up rear brake pads so quickly 92k miles on car and never replaced front pa 3 answers

My 2001 tahoe wore out the rear brake pads twice in 92,000 miles and I still havent changed the front ones and they look new .is this a proporioning valve problem

2001 Chevrolet Tahoe

-

Maintenance & Repair
Front Rotors Gone but Pads Still Good 5 answers

I just replaced the front brakes on my Cobalt SS. The rotors were warped and I could see they were badly grooved so I expected the pads to be down to metal. To my surprise the pads were barely wor...

2006 Chevrolet Cobalt SS Supercharged

-

Maintenance & Repair
REPLACEING FRONT BRAKE PADS 1 answer

HOW DO I REPLACE THE FRONT BRAKE PADS

1985 Chevrolet Astro

-

Maintenance & Repair