I have 2001 Hyundai Santa fe when I put the key in the ignition Switch nothing happens no lights on dashboard only power locks work brake lights but that is it can you help me pls anyone

I have 2001 Hyundai Santa fe when I put the key in the ignition Switch nothing happens no lights on dashboard only power locks work brake lights but that is it can you help me pls anyone 1 Answer

I have a 2008 hyundai santa fe gls 4dr. I originally had a problem with the car starting in park, which at first i thought was the battery as it was still factory. I changed the battery and realized it was not the problem as the car elctronics worked flawless but there was not sound of turn over or clicking just nothing. I soon discovered the car would crank and run as expected when shift release was pressed and the car was put into neutral. I diagnosed it as a neutral safety switch but after driving i realized the car will shift into the park position but it is not recognized by the vehicle and the car easily rolls as if in neutral and makes a clicking sound every few inches(maybe centimeter, a very short distance). so in short my vehicle starts in neutral, rolls in park while clicking, all other gears work fine from what i can tell. Im stumped. Can anyone point me in the right direction? Will the parking pawl affect my ability to crank the car in park? 3 Answers

I have a 2008 Hyundai Santa Fe gls 4dr. I originally had a problem with the car starting in park, which at first i thought was the battery as it was still factory. I changed the battery and realized...

ok, hello and thanks in advance for the help ... i have a Hyundai santa fe 2006, this is my story... i was out with the car and in a flash the car stop runing, and would not start again. I took it home with the help of a friend and began to try diagnose the problem because the check engine light was on... another friend came with a scanner and the code that came out of the pcm or icu told us that the problem was in the ride by wire system. I replace de system (pedal and servo unit in the intake manifold) pass the ignition switch, the check light went of... I try to start the car and the starter work fine but the car would not start! I began checking out the fuel pimp, and works fine; then I check the coil sparks and notice that in 3 easy ones to check front coils there is not spark whatsoever ... I try again to scan the car in the event that maybe another part or sensor was faulty, but the scanner says everything is fine! So, can anyone help me? Giovanni 1 Answer

ok, hello and thanks in advance for the help ... i have a Hyundai santa fe 2006, this is my story... i was out with the car and in a flash the car stop runing, and would not start again. I took it hom...

I have a 2011 Hyundai Santa Fe. When opening the doors...no lights come on. 4 Answers

The Door light button above my head is not working anymore. We replaced the door fuse and still no lights come on when opening the door. Is there another switch I could have pushed off???

I have replaced the battery and put a new starter in my 2009 santa fe and it still will not start. What is going on?? 4 Answers

I have replaced the battery and put a new starter in my 2009 santa fe 3.3L and it still will not start. What is going on??