Jump to Forum:

Chevrolet Cavalier Forum : “what can i do to get the most performance outta my 3.1 in my cavy”

Photo not available
Rio_66
09/08/2009, 12:51PM
About: Chevrolet Cavalier
what can i do to get the most performance outta my 3.1 in my cavy

Photo not available
Silvia_512
09/08/2009, 1:57PM

if I view your picture, you hava a 2000-2002 cavalier, you have the 2.2 SFI or 2.2 L Twin Cam ???

or put an ecotec :P

Is this post helpful? Yes | No
Photo not available
Silvia_512
09/08/2009, 2:03PM

sorry, i view the club picture ^^'

put an 3.8 or a 3.8 S/C

Is this post helpful? Yes | No
Photo not available
Rio_66
09/08/2009, 8:01PM

no i have a 94 z24 with a 3.1

Is this post helpful? Yes | No
Photo not available
Rio_66
09/11/2009, 1:55PM

if i put a 3.8 or a 3.8 s/c i have to rewire alot of stuff including diving into the brain granted i would anyway but if i went with a 3.4 i could still use my injectors and not rewire that part of the brain.....not to mention i would have to adjust alot of stuff to even fit it in lol

Is this post helpful? Yes | No
Photo not available
Ramon31
10/12/2009, 1:30AM

well, we have the same car, i think that engine does't need to bee changed, just put it a good air filter, new sparkplugs and a bigger muffler, thats what i deed to my car, and i have now more than 170 hp, is not much but you can beat a mustang v6 1995-1998!, i love z24, it is fun to drive

Is this post helpful? Yes | No
Photo not available
Cooper_183
10/12/2009, 11:23AM

there is not much you can do to a 3.1 but you could try a lighter under drive pully

Is this post helpful? Yes | No
Photo not available
Rio_66
10/12/2009, 2:31PM

well i have a k&n cold air intake, a 3 1/2 inch tip and bosch platinum plugs its pretty peppy just not as quick as i want it....im also thinkin of switchin it to a 5 speed...that should help my cause

Is this post helpful? Yes | No
Photo not available
Marquis_897
11/19/2009, 11:13PM

a 3.1 liter can push as much as 400-450HP, if u know wht yur doing. i had a 92 z24 with the same setup. to get the most out of it takes a lot of bills. put in a bigger camshaft with lifters of course. do ignition, exhaust, intake, u can also get ur cylinder heads ported and polished for about a 100.00 at any machine shop,  for all ur low end power. for high end power, install lighter crank, pulleys, pistons, bearings, fuel injection upgrades (fuel injectors, pump, wire harness, and chipped computer E.C.U.) u can find these parts on jbodyperformance.com or go to any engine shop.

Is this post helpful? Yes | No
Photo not available
Rio_66
11/19/2009, 11:28PM

wow thats in mega detail lol thanks bro now i should smoke what ever is on these streets here.

Is this post helpful? Yes | No
Photo not available
Marquis_897
11/19/2009, 11:32PM

word up 2 dose ricer hondas. if honda can do it, chevy can but betta.

Is this post helpful? Yes | No
Photo not available
Rio_66
11/20/2009, 12:42AM

all i have done is air intake custom box coming into my back seat and body kit and exhausts

Is this post helpful? Yes | No
Photo not available
Cooper_183
11/20/2009, 12:45AM

what? how?

Is this post helpful? Yes | No
Photo not available
Rio_66
11/20/2009, 1:10AM

how what?

Is this post helpful? Yes | No
Photo not available
Cooper_183
11/20/2009, 2:10PM

never mind read it wrong

Is this post helpful? Yes | No
Cavalier
Looking for a Used Cavalier in your area?
CarGurus has 1,636 Nationwide Cavalier Listings starting at $2,988.
ZIP: