i'm swaping engines
01 saturn i'm exchanging engines the other one is out of a 99' and does not have a place to bolt on the harness, this harness attaches with a bolt to the side of the block,will it make a difference.
If the axles end up in the right places, all else will be a bit of welding at worst. This is not a major engine support, but an electrical harness that we speak of...no? You cannot stretch a wire, scrunch it to make the whole mess smaller yes, provided NO pinching of any of the conductors takes place...so ya, why not~ mechanical interference is always a consideration...especially with regards to the steering gear and motion....a consideration as well as exhaust, and fuel placement~