how do I remove the door panels of a GMC 1993 Sonoma SL?

0

Asked by Rheas Jan 13, 2012 at 02:44 PM about the GMC Sonoma

Question type: Maintenance & Repair

I need to remove and then re-install the door panel to fix a dent. I would like to know how and if I'll need clips or something to re-install.

415

- Report

Mohammad answered about a year ago

few screws and anti rivet locks are used in door panel assembly just remove the screws and by pressing the panel u can remove the plastic anti rivet lock.

Mark helpful

Your Answer

my 03 sonoma v6 loses power when i turn the ignition? 2 answers

03 sonoma

2003 GMC Sonoma SLS Crew Cab 4WD

-

Maintenance & Repair
bulb replacement 1 answer

94 Sonoma, need to replace low beam bulb, no easy access from engine compartment. How should I go about replacing?

1994 GMC Sonoma 2 Dr SLS 4WD Extended Cab SB

-

Maintenance & Repair
How do I test a windshield wiper motor to see if it needs replaced? 2 answers

The wipers on my 1995 GMC Sonoma are working sporadically. Sometimes they stop in the up position, sometimes somewhere else. Sometimes they don't stop at all and other times, they don't start. I ...

1995 GMC Sonoma 2 Dr SL Standard Cab LB

-

Maintenance & Repair
there its not power going to my fuel pump 1 answer

I replace the fuel pump on my gmc sonoma 2000 lsl model but there its not reciving power, i change the fuel pump relay but still not working

2000 GMC Sonoma SLS Ext Cab Short Bed 2WD

-

Maintenance & Repair
what class 3 answers

i have a 1991 gmc sonoma sle extended cab is the SLE the top of the line model or base or mid

1991 GMC Sonoma

-

General