I HAVE A 1994 GMC SIERRA 2 WHEEL EXTENDED CAB THE TRANSMISSION WOULD ONLY SHIFT FROM 2 TO DRIVE DROVE LIKE THAT FOR A WHILE THEN IT STOP PULLING ALL A CERTIAN COULD SOMEBODY TELL ME WHAT THE CAUSE
Asked by JOHNSONSRP Dec 30, 2011 at 07:03 AM about the GMC Sierra 1500
Question type: Maintenance & Repair
THE TRANSMISSION WOULD ONLY SHIFT FROM 1 TO 2 BUT IT WOULD NOT SHIFT TO DRIVE OR WHEN YOU GO TO DRIVE IT WOULD STELL BE IN 2 DROVE LIKE THAT FOR A WHILE BUT ONE DAY COMMING FROM CHURCH THERE WAS A CLUMP LIKE SOME TURN LOSE AND IT STOP PULLING WONT GO FORWORD OR REVERCE.
6 Answers
YOUR CLUTCH PACKS INSIDE THE TRANS HAVE COME APART, NEEDS AN OVERHAUL AT THE BARE MINIMUM MAY NEED A COMPLETE REBUILD NEW PARTS AND WHATNOT, ANY TRANS SHOP WILL BE ABLE TO FIX THIS PROBLEM FOR YOU, ANOTHER OPTION IS CALL A SCRAP YARD AND GET A USED UNIT PUT IN
JOHNSONSRP answered 12 years ago
THANK'S, BUT BEEN CHECKING ALL THE YARDS CAN'NT FIND ONE SEEN LIKE ONLY A LATE 93 OR 94 WILL FIT YOU KNOW WHERE I FIND ONE.
THAT I BELIEVE IS THE YR THEY STARTED EXPERIMENTS BETWEEN DIFFERENT WAYS FOR TRANS SHIFTING, ONLINE USUALLY BRNAD NEW UNITS STILL ONLY RUN U ABOUT 3G FROM JEGS OR SUMMIT JUST TO NAME A COUPLE.
look for a gm trans called the 4L60 that is the trans used in those trucks the 4L60E is computer controlled and will do u no good
Thanks for clarification I have 94 4x4 ,350 Throtle body inj. 3rd falls off flat. Drop the e will it have cable lockdown?
will the neutrol start switch and shift control cause it to not shift correctly
