Jump to Forum:

Pontiac Trans Am Forum : “93 Shut offs”

Great Deals Used Pontiac Trans Am
Find deals in your area at Cars.com
Zip:  
Photo not available
08/07/2008, 4:07PM
About: Pontiac Trans Am
93 Shut offs

i have a 93 TA LT1 with the 4spd auto, not sure if its a 4L60 or 4L60E transmission. as far as i know shes bone stock at 170,000 miles. but it doesnt shut off i've taken it up to 140 and it just keeps going. now is that normal for most F-Bodys? or has someone hit a rev limiter

Photo not available
08/07/2008, 4:47PM

Sounds about normal.

Is this post helpful?
Photo not available
08/08/2008, 1:51AM

nothings wrong sounds normal

Is this post helpful?
Photo not available
08/08/2008, 12:35PM

boom!!!! goes the LT1

Is this post helpful?
Photo not available
08/08/2008, 12:54PM

actually the LT1 was one of the best motors built in the 90's out of american sports cars.
certainly better than that pos 4.6 that came out in the 96 mustang gt
if memory serves correct those motors were prone to blowing head gaskets....
but you insist its "boom" goes the LT1...

Is this post helpful?
Photo not available
08/08/2008, 12:55PM

AND YOU EVEN HAVE A LT1

Is this post helpful?
Photo not available
08/08/2008, 5:42PM

yes I do! and it doesn't have 170,000 miles on it doing 140mph in an auto. probably 5200rpm

Is this post helpful?
Photo not available
08/08/2008, 8:02PM

Don't pay attention to these other idiots first off it the 4L60 E trans and yes its normal there is no speed limtit just rev limit I ran mine to 150 and wasn't even turning 5000 revs

Is this post helpful?
Photo not available
08/14/2008, 11:36AM

idiots...

he has a 93...thats the 700R4...nice

Is this post helpful?
Photo not available
08/14/2008, 7:45PM

They stoped 700R4's back in 92........

93 was the first year for the 4L60/4L60E powertrain...
but you know i just dont know bout a shut off... btw... i was doing less than 5200 RPM i went out and did it again. at 130 i was at 3200 RPM. so 140 couldnt be 5200.
its outrageous to think that it takes 2000 rpm just to get 10 mph faster in that car.

Is this post helpful?
Photo not available
08/14/2008, 10:00PM

listen I pulled the #5200 out of my ass. Hope you aren't by me when you are doing that shit. Good luck with your salt flat runs, and if I do see you honk three times and watch my taillights

Is this post helpful?
Photo not available
08/14/2008, 10:17PM

i dont think i'll ever be near the salt flats.......
and mine is bone stock... its a 93... the motor might be rebuilt thats all.
whoopidy do! are you proud cause you spent money into your toy. and you have to flaunt it?
are you proud cause you pull shit out of your ass cause it seems you like to do that too!

i wish i could be like you
a complete tool

Is this post helpful?
Photo not available
08/24/2008, 8:23PM

cc503
ProMag 1.6 RRs
PP heads
3 angled valve job
918 beehive springs
pacesetter longtubes
magnaflow catback, no cats
MadZ28 tune
LT1 vette valve covers
C5 brakes
Z06 magnesium wheels
Centerforce dual friction clutch
LS1 aluminum Driveshaft
****MSD OPTI****
magnacore wires
colder plugs Autolite 104s
11:1 compression

www.cardommain.com/id/maybe2fast

Is this post helpful?
Photo not available
08/24/2008, 8:26PM

wat did it dyno at? that actually sounds to be a pretty mean build.

Is this post helpful?
Photo not available
08/25/2008, 8:08AM

no dyno yet!

Is this post helpful?