1994 f superduty hyd. clutch only have 1/2 inch of throw at slave cyl. all new parts Is this normal

0

Asked by jackster Mar 02, 2010 at 07:06 PM about the Ford F-450 Super Duty

Question type: Maintenance & Repair

25

- Report

Keven answered 3 years ago

Try gravity bleeding the hydralic system.

Mark helpful

0

- Report

Dawn answered 3 years ago

that is all you are supposed to have

Mark helpful

Your Answer

at 65mph I am running at 3000 rpm. Tis is a 6.4 with a five speed trans. It seems like it has no overdrive. Could this be true or is this normal. Ron 8 answers

Please let me know at veepman@san.rr.com

2008 Ford F-450 Super Duty Lariat Crew Cab 4WD

-

Maintenance & Repair
1988 Ford Ranger "On & Off" clutch problem ? 2 answers

Hello, One of my 88 Ford Rangers has a 2.9 V6 w/5 speed Mit. transmission. Several years ago we put in a new clutch, pressure plate, throw out bering and clutch slave. Within the past several weeks ha...

1988 Ford Ranger

-

Maintenance & Repair
Gear box or Clutch 17 answers

Hi all!I have a 2003, focus 2.0, 5 speed Zetec. PULP Prob: Always held revs for a sec after deceleration Gear clash in 2nd and 3rd on up or down shift Interventions: Put Nulon gear oil in b...

2003 Ford Focus

-

Maintenance & Repair
What is wrong with my clutch? 1 answer

my clutch has not been working right. ill start up my truck then push clutch in and try to put it in gear but it bumps then i push it in. when i change gears, i push clutch in and it doesnt act like ...

Ford F-250

-

Maintenance & Repair
Clutch doesn't fully engage. 2 answers

After sitting for about a week, while attempting to drive, the clutch only engaged slightly. I was able to shift gears but with some grinding. Prior to this there was no clutch slippage. Also after pa...

1991 Ford Probe GL

-

Maintenance & Repair