Jump to Forum:

Dodge Dart Forum : “73 Dart”

Photo not available
Patrickjubm
10/17/2009, 9:17PM
About: 1973 Dodge Dart
73 Dart

I'm having a 360 Dodge motor rebuilt and I'm looking for a recipe to get
around 325 to 350 horses. I was wondering what the best Cam, Intake and Carb would be to reach my goal. Any help will be appreciated.
Thanks,
Patrick

Photo not available
Johnny610
11/16/2009, 1:12AM

a cam is up to how you want it to idle and preform...i race mine and have nitrous with a similar power mark to you and i run a .501 lunati...but the idle is a little choppy so if you're just street driving the thing you might wanna settle for something more in the .460 lift range...for it to still sound like it has some thunder i wouldn't drop below a .450 or so lift, you're stock under that...edelbrock performer is a good intake...weiand also makes a good one...as for a carb i'd go with a 750 holley...if you plan on opening it up or racing it( you can always jet down if it seems to be rich)...again if its only street a 650 holley would also do the job...i'd stay away from the edelbrock carb as a side tip...unless you need a good door stop.lol anything else just ask, i have a dart myself and went through the same thing

Is this post helpful? Yes | No
Photo not available
Johnny610
11/16/2009, 1:13AM

this is my dart....also you might wanna get on summitracing.com...that might be your new candy store.lol  they specialize in all formentioned parts if you're not familiar with them

Is this post helpful? Yes | No
Dart
Looking for a Used Dart in your area?
CarGurus has thousands of Nationwide Listings and the tools to find you a great deal.
ZIP: