what is the firing order for a 1982 chevy s10

0

Asked by cliff Mar 27, 2007 at 08:04 PM about the 1982 Chevrolet S-10

Question type: Maintenance & Repair

Engine is a V-6 2.8 liter

9,190

- Report

LouB answered 6 years ago

Hi Cliff! It's 1-2-3-4-5-6 ... From a thread I found on the web: "1 is left front cylinder or passenger side front 1-3-5 Drivers side front is 2-4-6 ... The distributor number one is right in the middle to the front of cap and it turns clockwise so like six o'clock on a clock is number one and then around 2 3 4 5 6" ... Hope that helps ... Good luck!

1 out of 1 people think this is helpful.

Mark helpful

Your Answer

What is the firing order for the 87 2.8 s10 v6? 3 answers

Firing order of the spark plugs for this engine.

1987 Chevrolet S-10

-

Maintenance & Repair
what is the firetng order for a 1990 2.5 s10 2 answers

spark plug fireing oreder for a chev 2,5 s10

1991 Chevrolet S-10 STD Standard Cab SB

-

Maintenance & Repair
1996 s10 not fireing 5 answers

1996 s10 4.3 will not fire

1996 Chevrolet S-10

-

Maintenance & Repair
I have a 2000 Chevy S10 that will not start checked fule filter to see if stoped up.Was not. then check fire it got fire but very little. then batter went low and would not turn over so canit be that the batter? I also tryed to jump off and that helped but still would not start.What could be the problem? 4 answers

I have a Chevy S10 that will not start check fuel filter,It seemed ok then checked fire,it did fire but only one time then battery went down and I had to jump off then it turned over plenty but would ...

2000 Chevrolet S-10 2 Dr STD Standard Cab LB

-

Maintenance & Repair