Chevrolet Monte Carlo Forum : “what is the rim bolt pattern on a 78 landau?”

New Topic

Great Deals — Used Chevrolet Monte Carlo

Find deals in your area at AutoTrader.com

erik6061

05/28/2008, 3:22PM

About: 1978 Chevrolet Monte Carlo

what is the rim bolt pattern on a 78 landau?

I found a pair of rims off a 78 monte carlo landau that i want to put on my 94 Trans Am ( 5x120.7mm). I want to know if they will fit before i buy them as they have to be shipped from another state.

Steven477

05/28/2008, 4:03PM

Its the same as a camaro,S10,etc I think.

littlehorn

05/29/2008, 7:51AM

www.discountedwheelwarehouse.com has a bolt pattern interchange guide that will tell you.

Michael8126

05/29/2008, 7:53PM

They should fit as long as the bolt hole and backspaceing are the same!

Josh416

05/29/2008, 10:18PM

they will fit

Cory238

05/29/2008, 10:53PM

check the backspacing of the rim. i tried a 17 in. trans am rim on my '79 monte carlo and it did not clear the upper control arm. 4.5 in. of backspacing is a good start point. i got 17 in. rims on the rear of mine w/ 5 in. backspacing and 16 in. on ffrom w/ 4 in. of backspacing. its a safe start.

Reply to Topic