no spark on my 86 bronco 2
i was being a dumb ass and drilled right through my wireing harness and caused a short. i fixed the wires that i cut, used a test light to test the wiring to the starter relay, tfi module and replaced it. tested the coil and the power going to the distributor from the coil. when i would try to start the car the starter relay was making noise too.
you probley shorted out the starter,or battery.
Are you getting power to the coil? Did you check the ground(s)? If there is power to the coil, then it's bad if it is not throwing spark.
you could check your plug-ins on your wireing harness,sometimes corosion builds in the plug-in and the wires corrode and break.could u give us more details on your problem?
he said he drilled through the wires,have the battery starter and alt checked
Search Ford Bronco II Questions
Ford Bronco II Experts