I have a 1967 Chevelle SS396 with a 396 cu in/350 hp engine in it. Several years ago I had the heads removed and the valves refurbished. When the mechanic put it back together he said that he had pu

I have a 1967 Chevelle SS396 with a 396 cu in/350 hp engine in it. Several years ago I had the heads removed and the valves refurbished. When the mechanic put it back together he said that he had pu 1 Answer

With a charged battery and the clutch pushed in ,nothing happens when i try to start. This happened after changing the valve covers. Could i have accidentally unplugged something? 1 Answer

Was running great, I replaced the valve covers and noticed a couple bare wires near the distributor unplugged but they look like they have been for a while. when I get in an turn the key nothing happ...

i have a 69 sedan tat came with a V8. is it worth restoring? i have been told that there were not many of these cars built. 1 Answer

it is a 2 door post chevelle, 300 sedan i believe. it has a framed door with a vent window on it, a post pillar, and it seems to be shorter and weighs a lot less than the sports coupe. it had a v8 in ...

Front Sway bar bushings 1970 Chevelle SS 396 1 Answer

Rebuilt the front suspension of my 1970 Chevelle SS 396. Cannot find front sway bar bushings 1 1/18" diameter. Everyone wants to sell me the 1" bushings which are too small. Any suggestions? I have ch...

My car does nothing when I turn the key 4 Answers

My 69 chevelle ss does nothing when I tun the key I had to replace the starter and after I did it won't turn over any suggestions?