How to remove a headlight assembly on a 2005 Montana Van 2 Light System

0

Asked by John77778 Jan 05, 2013 at 05:13 PM about the 2005 Pontiac Montana SV6

Question type: General

My van has a 8 inch rod that hold the right side of the 2 light assembly and one screw that holds the left side. I have remove both but I cannot get the assembly out. I do not have thumb screws

30,465

- Report

tenspeed answered 4 months ago

Video instructions for replacement - http://www.youtube.com/watch?v=C4uKElPRasU

2 out of 2 people think this is helpful.

Mark helpful

Your Answer

Any recalls for door problems 5 answers

I am having problems with the power sliding door on my van. It won't close if the engine is running but can be closed when shut off. However, if you start the car with the door shut there is a const...

2006 Pontiac Montana SV6 4dr Minivan AWD

-

Maintenance & Repair
Remote start... 1 answer

My remote start will not work. It's an aftermarket system I believe, but when you hit the start button, you can hear the starter on the 3.5L motor engage, and then on the driver's information screen ...

Pontiac Montana SV6

-

Car Customization
air conditioning 3 answers

air conditioning not blowing cold air at all, help.

Pontiac Montana SV6

-

Maintenance & Repair
1998 firebird formula turns over but want start 6 answers

i have a worn gear in righr front headlight .when i cut them off the motor runs for 5 seconds. wife come home cut the light off motor run 5 seconds.then when she got to our back deck she heard it run ...

1998 Pontiac Trans Am

-

General
How does the rail system in cargo area work on the 2005 Pontiac Vibe? 2 answers

The owners manuel does not have instructions-- it just mentions it.

2005 Pontiac Vibe Base

-

General