ALL LIGHTS WORKING ON 1990 MERCURY SABLE EXCEPT THE SIGNAL LIGHT. WOULD IT BE A FUSE OR FLASHER

0

Asked by gary_52 Jan 21, 2012 at 08:42 PM about the 1990 Mercury Sable

Question type: Maintenance & Repair

Not Active

- Report

papa answered about a year ago

bad flasher or turn signal switch.check the 1157 bulbes,they have the signal wire in them.

1 out of 1 people think this is helpful.

Mark helpful

0

- Report

gary_52 answered about a year ago

Thanks papa for your input. Replaced fuse and all is well.

Mark helpful

Your Answer

what could be the cause of my 2003 sable ls' turn signals not working-flashers not working-cruise not working and blower motor not working? 2 answers

As of 3 days ago, when you push the button to start the air blowing at a certain temperature, nothing happens. Defroster does not work either. Prior to that, a small clicking sound which seemed to hap...

2003 Mercury Sable LS

-

Maintenance & Repair
i have a 2000 mercury mountaineer. it runs great but now the blinkers dont work no lights on in the inside and they dont blink on the outside either....is there a fuse? 2 answers

Mercury Mountaineer

-

Maintenance & Repair
Directional will only work for one click, but flashers work all the time? 2 answers

2003 Mercury Mountaineer 4 Dr STD AWD SUV

-

Maintenance & Repair
How do you remove the steering column cover? 1 answer

I need to replace the flasher and understand that I need to remove the steering column cover to replace it. I can not figure out how to get it off.

1999 Mercury Cougar 2 Dr V6 Hatchback

-

Maintenance & Repair
How to change Flasher Fuse 4 answers

When I turn on my right signal light, the light just stays on. I think it might just be the flasher fuse in it. I was just wondering where i install it? If thats not the case than would I just need tw...

1993 Chevrolet Caprice

-

Maintenance & Repair