Ok 2.7L yes and now I have a hole /tear in the top of the valve cover but still runs what has happened

Ok 2.7L yes and now I have a hole /tear in the top of the valve cover but still runs what has happened 1 Answer

OK, I also have a 2003 Dodge Intrepid Interceptor, it has been broken down for a little while with what I was told was a hole in the head gasket. I am debating on if it would be better to sell it or try and get someone to repair it for me. I love this car but its just sitting right now. Hoping for some good advice. There are pictures of it in my garage. 6 Answers

after blowing a radiator hose it wouldn't drive far without over heating, but would sit and idle for ever without heating. Mechanic in New Mexico couldn't figure the problem out for a week and after ...

I got a P0340 on my '96 intrepid ES. Cam position sensor. I replaced it, but still no go. Put the diagnostic machine on, and still I get a P0340 code, even with the new sensor. What gives here? 1 Answer

I am only getting one code reading on the OBD reader, and that is the p0340. Not sure what the hell else is wrong, but i am not pushing any other codes. If I blew my timing belt, i am certain I would ...

2.7 engine. have a little hole that keeps leaking coolant from the motor . its not cracked and there is no grooves so no screw is missing. we think it might be a freeze plug. but its very small. 34 Answers

need to know if there is a freeze plug in the back of the engine where the coolant is leaking from bcz a hole is there . its the black hole by the silver bolt.

replaced radiator,thermostat,and bleeder valve still over heats 9 Answers

hi i have a 99 dodge intrepid 2.7 L and i replaced a bad radiator because the old one was bad ok done so i was running at good temp circulating fine but no heat ok thermostat right? i replaced the the...