I changed my ignition switch on my 2006 dodge grand caravan does it have to be programmed to the van

I changed my ignition switch on my 2006 dodge grand caravan does it have to be programmed to the van 1 Answer

Do I need a special tool to remove the ECT on my 2019 Dodge Grand Caravan? 9 Answers

I need to replace my ECT sensor on my 2019 Dodge Caravan. It appears I will need a special tool. Before I start on it does anybody know if a special removal tool is needed? It is in a hard to reach ...

On a 2000 Dodge Grand Caravan LE, the electric windows won't roll up. Last week the passenger window wouldn't work, I turned the ignition key a couple of times and then it worked. Tonight, the drivers side window is about 1/3 down and won't go up. The passenger side would work though. I tried the ignition switch a couple of times and that didn't help. I then disconnected the battery to let the computer reboot. I waited 60 seconds hooked up the battery cable and now neither window will work. I have a 96 Caravan also, so I swapped the window switch between the two vehicles and nothing changed. I have tried to find the window fuse or relay and can't find it. The rear wing windows do work. Help, thanks 3 Answers

I have a 2000 Grand Caravan and the windows won't roll up this happened last week also. I turned the key on and off a couple of times and then they worked. I swapped the window switch and that is not ...

If I wanted to replace the BR/GY wire(feild wire) to the Alternator If I wanted to replace the BR/GY wire(field wire) to the Alternator in my 2005 Dodge Grand Caravan, where would I run it? 6 Answers

If I wanted to replace the BR/GY wire(feild wire) to the Alternator in my 2005 Dodge Grand Caravan, where would I run it? Would I just go from the Alt. to the correct pin in the PCM? My PCM is appar...

96 dodge caravan does not want shut off, no key in ignition switch, I had to disconnect the neg wire.. If i try to put the wire back on battery car tries to turn on. 2 Answers

96 dodge caravan does not want shut off, no key in ignition switch, I had to disconnect the neg wire.. If i try to put the wire back on battery car tries to turn on. I checked tumbler all seems well ...