I changed my oilpan gasket now my truck won't start I had to jack up motor to do it

I changed my oilpan gasket now my truck won't start I had to jack up motor to do it 2 Answers

Nothing happens when I try to start my truck 1 Answer

Ok so my 1973 ford f100 doesn't do anything when i try to crank it. I have replaced the battery, the starter solenoid, the voltage regulator, and the alternator and i am still having the same pro...

What do I look at to start getting my truck running? 9 Answers

Hi, Thanks to anyone who is looking at this, I am wondering if anyone knows what to start looking at, (special emphasis on START) to getting my truck back into running condition. It is a '61 Ford, V8,...

my 1958 f100 ran perfect then i didnt drive it for a week and tried to start it and it wont run 7 Answers

it tries to start here and there but then it just smokes alot and dies. it wont even run on starting fluid, to rule out the fuel pump which i checked and it works fine. i cleaned the carb and checke...

I have a 67 F-100 with a 390. I am experiencing an intermittent but annoying problem. The truck will start right up most times don't need to touch the gas pedal. The truck runs for say 10 minutes (this varies) then shuts off like I turned off the key. Sotimes it will start right up and other times I have to hold the gas to the floor. Then the game is on. It will stall and I will get stranded. The truck was put up for the winter & I just took it out. It started right up and after letting run for a few minutes I drove it home about 65 miles. No problems at all. 2 days later I go out starts right up go 2 miles stop for gas and it shuts off before I can turn it off. I have had issues before when it gets hot and it will stall and then not start. Please help. 3 Answers

Truck has holly carb 4 barrel on an edelbrock manifold. Cast iron headers