What type obd system in 91 integra

5

Asked by jopatmu Jul 08, 2012 at 02:44 PM about the 1991 Acura Integra

Question type: Maintenance & Repair

it has 2pn and 3pn which to use to hook up reader/scanner

540

- Report

wb6epp answered 10 months ago

The OBD ll {2} is the one for this year of car. But I am not sure you are looking at the plug for OBD-ll, as my jeep runs a 9 pin plug, so I am not familuar with any plug with 2 or 3 pins. Might be, I just haven't run to one. My Pontiac also took the 9 pin.

Mark helpful

185

- Report

Stephen answered 10 months ago

OBD-II (2 )was not implemented until 1996. Your 91 Integra is OBD- I (1), and the connector for it is in the passenger foot well. It is a green plug.

Best Answer

Mark helpful

Your Answer

How high should the RPM's run on this type of car? 22 answers

I just bought an Acrua Integra (1993) and the rpms run really high on it. Is it normal in this model car to be going 60mph and it be at 3.5 rpm?

1993 Acura Integra 2 Dr LS Hatchback

-

Maintenance & Repair
where can i 30 answers

Where can i get cheap parts for a 2000 Acura Integra?

2000 Acura Integra 2 Dr GS-R Hatchback

-

Maintenance & Repair
oil leaking onto muffler from where? 11 answers

i have a 9 integra im leakin a smakk amount of oil onto the exhaust its coming from the back of the engine but i cant see much with the intake in the way does anyone know if this is a known problem o...

1993 Acura Integra 2 Dr LS Hatchback

-

Maintenance & Repair
WHAT IS THIS AND HOW MUCH WILL IT TAKE TO REPAIR. 1 answer

I HAVE A 91 ACURA INTEGRA LS AND IT HAS A VERY SMALL AMOUNT OF OIL LEAKING FROM A FLAT CIRCULAR BLACK PIECE OF PLASTIC RESTING ON THE LEFT SIDE OF THE ENGINE.

1991 Acura Integra 4 Dr LS Sedan

-

Maintenance & Repair
integra 4 answers

hi, i have an automatic 2000 integra with a b18b1 engine in it. i was just wondering if you think it would be safe just to upgrade intake(cold air intake,throttle body, and intake manifold) exhaust(he...

2000 Acura Integra

-

Car Customization